Combining Multiple Batches of Originals with Different Copy
Settings (Job Block Combination)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Combining
Multiple Batches of Originals with Different Copy Settings(p.4-84)."
Remark
You can use the Cover/Sheet Insertion mode for the
combined document. You cannot use the Cover/Sheet
Insertion mode for each batch of originals.
If you use the Job Block Combination mode, the Job
Build mode is automatically set for each batch of
originals. You cannot use the Job Build mode for the
combined document.
You cannot make an Interrupt copy while copying with
the Job Block Combination mode.
1. Press [Others] → [Job Block Combination].
2. Press [Set] → specify the copy settings for the combined document →
press [OK].
If you select special features before setting the Job Block Combination mode, the selected
special features will be retained for the combined document.
Combining Multiple Batches of Originals with Different Copy Settings (Job Block Combination) 7-103
You cannot store the Job Block Combination mode in
Standard Settings.
You cannot store the Job Block Combination mode in
Mode Memory.
You cannot recall the Job Block Combination mode.
7