Canon iR3245 Manual page 125

2. Select [All Pages] or [Specified Pages] → press [OK].
If you select [Specified Pages]:
●
If you select [Specified Pages]:
Press [First Page] and [Last Page] → press [-] or [+] to set their respective
page numbers.
3. Press [Start Print].
If you select [Specified Pages], specify the page numbers of the output. Note that the page numbers of the
output may be different from those of the stored document.
If you select [Specified Pages], the Staple, Hole Punch, or Booklet mode cannot be set.
You cannot change [All Pages] to [Specified Pages] or vice versa after the sample print is output.
If you select [Specified Pages], you cannot change the specified pages after the sample print is output.
4. Check the sample print → select [Start Print], [Cancel], or [Change
Settings].
To print the remaining prints:
●
Sample Print 2-59
2