Making Copies For Use As A Booklet (Booklet) - Canon iR3245 Manual

Making Copies for Use as a Booklet (Booklet)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Booklet
Mode(p.4-12)."
Remark
The 2-Sided Original mode is available only if the
optional Feeder (DADF-U1) is attached
(standard-equipped for the iR3245N/iR3235N/
iR3225N).
Saddle stitching is not performed when there is only
one sheet.
Saddle stitching can be performed only if the optional
Saddle Finisher-AE2 is attached.
1. Press [Book/Page Edit/Shift] → [Booklet].
2. Press [Set] → specify each setting.
The accuracy of folds created in the Saddle Stitch
mode may vary, depending on the paper type and the
number of sheets.
Make sure to place originals with a vertical (portrait)
orientation vertically. If these originals are placed
horizontally, the even numbered pages will be printed
upside down.
When printing on special types of paper, such as
heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy
paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam,
and a service repair may be needed.
Making Copies for Use as a Booklet (Booklet)
7
7-63