Scanning Two-Sided Originals - Canon iR3245 Manual

Scanning Two-Sided Originals

You can set the machine to automatically turn over two-sided originals that are placed in the feeder,
3
and scan each side separately.
Remark
The 2-Sided Original mode is available only if the
optional Feeder (DADF-U1) is attached (standard
equipped for the iR3245N/iR3235N/iR3225N).
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
When you are scanning originals with a horizontal
(landscape) orientation, such as A4R and A5R, make
sure to place them horizontally in the feeder. If these
originals are placed vertically, the back sides of the
originals are scanned upside down.
1. Select the desired User Inbox number → place your originals in the
feeder → press [Scan] → [2-Sided Original].
3-98 Scanning Two-Sided Originals
If you placed your originals on the platen glass, follow
the instructions displayed on the screen to scan each
side of the originals.
To cancel this setting, press [2-Sided Original] →
[Cancel].