Changing Colour Modes - Canon iR3245 Manual

Changing Colour Modes

This machine comes with the Automatic Color Selection mode, which recognizes whether an original
3
is in colour or black-and-white, and then automatically switches between the Full Color mode and
Black and White mode. You can also manually switch between the Full Color mode and the Black and
White mode whenever necessary.
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
To scan in colour, it is necessary to install the optional
System Upgrade RAM to expand the memory capacity
of the machine.
Auto-Color Select
If the Auto-Color Select mode is selected, the machine automatically recognizes whether the original
is in colour or black-and-white. Colour originals are scanned in the Full Color mode, while
black-and-white originals are scanned in the Black and White mode.
Remark
When the Auto-Color Select mode is set and your
originals contain colour sections, the machine scans
them in the Full Color mode. However, the machine
may scan the colour originals in the Black and White
mode under the following conditions. To avoid this, set
the colour mode to 'Full Color'.
If the originals contain a few colour sections
If the colour sections are located on the left side
(within 10 mm from the left edge) of the originals
when loading the originals in the feeder
If the colour sections of the originals are close to
black
If the originals contain light colour densities
3-100 Changing Colour Modes
The default setting is 'Black and White.'
You can store the colour mode as Standard Scan Settings
in Mail Box Settings (from the Additional Functions
screen). (See "Standard Scan Settings(p.8-35).")