Canon iR3245 Manual page 85

5. Press [Scan].
6. Specify the desired scan settings.
When the Auto-Color Select mode is set and your originals contain colour sections, the machine scans
them in the Full Color mode. However, the machine may scan the colour originals in the Black and White
mode under the following conditions. To avoid this,set the colour mode to 'Full Color'. (See "Changing
Colour Modes(p.3-100).")
If the originals contain a few colour sections
If the colour sections are located on the left side (within 10 mm from the left edge) of the originals
when loading the originals in the feeder
If the colour sections of the originals are close to black
If the originals contain light colour densities
To adjust scan exposure and select original type, see "Exposure and Original Type Settings(p.3-55)."
Storing Originals into an Inbox
2
2-19