Canon iR3245 Manual page 99

If you want to select a paper size manually:
Select the desired paper size.
The paper sizes/types are indicated by icons on the touch panel display, in the order in which they are
loaded in the paper drawers.
Icons indicating the type of paper loaded in each paper drawer can be displayed on paper selection
screens, if you store that information into the machine beforehand. (See the Reference Guide.)
indicates that the paper is set vertically, and
<R> (such as in A4R) used in paper size designations indicates that the paper is loaded in a paper drawer
or the stack bypass horizontally.
If you want to select a standard paper size:
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [Stack Bypass Settings] to specify the desired paper size/type.
Select the desired paper size → press [Next].
To select an inch paper size, press [Inch-size].
indicates that the paper is set horizontally. The suffix
Paper Selection
2
2-33