Canon iR3245 Manual page 268

Remark
The 2-Sided Original mode is available only if the
optional Feeder (DADF-U1) is attached
(standard-equipped for the iR3245N/iR3235N/
iR3225N).
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-2)."
Saddle stitching is not performed if there is only one
4
output sheet.
The Saddle Stitch and Divided Booklet modes can be
set only if the optional Saddle Finisher-AE2 is
attached.
1. Place your original → press [Special Features] → [Booklet].
2. Select the original size → press [Next].
If the original is two-sided, press [2-Sided Original] → select the type of two-sided original
→ press [OK] → [Next].
Details of each item are shown below.
[Book Type]:
4-14 Booklet Mode
The accuracy of folds created in the Saddle Stitch
mode may vary, depending on the type and quantity of
paper.
When printing on special types of paper, such as
heavy paper or transparencies, be sure to correctly set
the paper type, especially if you are using heavy
paper. If the type of paper is not set correctly, it could
adversely affect the quality of the image. Moreover, the
fixing unit may become dirty, or the paper could jam,
and a service repair may be needed.
Make sure to place originals with a vertical (portrait)
orientation vertically. If these originals are placed
horizontally, the even numbered pages will be printed
upside down.
The front and back sides of