If you want hole punches made, press [Hole Punch].
2. Select the type of staple ([Corner], [Double], or [Saddle Stitch]) and the
stapling position.
Specify the Saddle Stitch.
Press [Paper Select] → select the paper source to use for the main document
→ press [Done].
If you selected the paper to use for the main document from [Stack Bypass Settings], select
the paper size and press [Next] → select the paper type and press [OK] → press [Done]
If you want to add a cover, press [Add Cover].
Select the paper source to use for the cover and whether to print on the cover → press
[OK].
If you selected the paper to use for the cover from [Stack Bypass Settings], select the paper
type → press [Done].
The paper used for the cover page must be the same size as the other pages in your document.
If you select [No] for <Select whether to print on covers.>, [Heavy] can be selected.
Collating Pages and Stapling (Staple)
7
7-35