Copy Set Numbering
1. Place your originals → press [Special Features] → [Pg/Copy Set
Numbering].
2. Press [Copy Set Numbering].
3. Select the orientation and the position of the copy set numbers → press
[Next].
Press [Full Surface] to print the copy set number repeatedly over the surface of the output.
Press [Numbers in 5 Locations] to select all five print positions.
If Copy Set Numbering Option Settings in System Settings (from the Additional Functions screen) is set to
'On', [Numbers in 5 Locations] is grayed out and cannot be selected. (See the Reference Guide.)
If you set any two of the Page Numbering, Copy Set Numbering, Watermark, or Print Date modes to print
in the same position, a message asking for your confirmation is displayed when you press
If [Adjust Position] is selected:
●
.
Copy Set Numbering
4
4-75