Reducing/Enlarging Using the Original and Record Sizes
The Zoom Program mode enables you to reduce or enlarge originals by individually entering the
dimensions of the original and record size.
The available zoom ratios are from 25% to 400% when the original is placed on the platen glass, and
from 25% to 200% when the original is placed in the feeder.
The following two Zoom Program modes are available.
Remark
The specified sizes are converted into a zoom ratio (%)
by the machine using the formula below.
The result is rounded to the closest integer.
Zoom ratio (%) = (record size/original size) × 100
To cancel this setting, press [Copy Ratio] → [Zoom
Program] → [Cancel].
Scanning with the Same XY Zoom Ratio (Zoom)
You can set the same zoom ratio for both the horizontal (X) and vertical (Y) axes.
Scanning with Different XY Zoom Ratios (XY Zoom)
You can set different zoom ratios for the horizontal (X) and vertical (Y) axes.
For instructions on entering values in inches, see the
Reference Guide.
Reducing/Enlarging Using the Original and Record Sizes
3
3-69