Margin Mode
This mode enables you to make copies or prints with the entire original image shifted by a designated
width to the left, right, top, or bottom in order to create a margin on the copies. Use this mode to make
copies or prints ready for placement in ring binders.
4
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-2)."
The Margin mode shifts the entire original image by the
designated width. Therefore, an original whose image
extends all the way to the edges of the sheet may be
partially cut off on the copy.
1. Place your originals → press [Special Features] → [Margin].
4-30
Margin Mode
You can choose to only create a margin on the back
side of a copy. Therefore, originals that already have a
margin can be copied in the 1
1-Sided mode.
2-Sided mode or 2