Making Copies With Margins (Margin) - Canon iR3245 Manual

Making Copies with Margins (Margin)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Margin
Mode(p.4-30)."
Remark
When the Margin mode is set, the entire original image
is shifted to the left, right, top, or bottom by a selected
width, then copied. When copying an original image
that extends to the edge of the sheet, part of that
image will be cut off.
1. Press [Book/Page Edit/Shift] → [Margin].
2. Select the desired margin type → set the margin width.
Press [-] or [+] to set the margin width (-50 mm to +50 mm) of the front and back side of the
paper.
If you are using the Margin and 2-Sided modes together and copying an original that already has margins,
follow the instructions below:
1
2-Sided:
2
2-Sided:
Set the Margin mode for the back only.
You do not need to set the Margin mode. Proceed
to make copies or prints in the usual way.
Making Copies with Margins (Margin)
7
7-77