5. Press
.
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display → press
[Done].
Copying starts.
To cancel this setting, follow the procedure below.
For modes which have a right triangle (
Example: Frame Erase
Press [Special Features] → [Frame Erase] → [Cancel].
For modes which do not have a right triangle (
Example: Job Build
Press [Special Features] → [Job Build].
To cancel all settings and return the machine to the Standard mode, press
once for each original. When scanning is complete, press
) on the bottom right of their key:
) on the bottom right of their key:
Specifying the Special Copying Features
.
4-5
4