Attention (Combination Of Copy Settings) - Canon i-SENSYS MF6140dn User Manual

0FR4-049

Attention (Combination of Copy Settings)

You can combine and use various copy settings. This applies to Mode Memory registration and default value settings as
well.
However, the following limitation is found in the setting combination.
<No. of Copies>
<Density>
<Original Type>
<2-Sided>
<Copy Ratio>
<Paper>
<4 on 1>/<2 on 1>
<ID Card Copy>
<Collate>
<Erase Frame>
<Sharpness>
Downloaded from ManualsPrinter.com Manuals
Nothing special.
When <Background> is set to <Auto>, <Original Type> is changed to <Text>.
If <Original Type> is set other than <Text> when <Background> is set to <Auto>, the <Auto>
setting in <Background> will be cancelled.
Depending on its paper size (selected paper drawer), 2-sided copy is not available.
Depending on its paper size or paper type in the selected paper source, 2-sided copy is
not available.
"Supported Document Types"
This feature cannot be combined with <ID Card Copy>.
When you want to copy documents in a reduction ratio different from its default value for
<4 on 1>/<2 on 1>, secify the <Copy Ratio> later.
<Copy Ratio> is fixed at 100 % for <ID Card Copy>.
The frame width specified at <Erase Frame> increases/decreases according to the <Copy
Ratio> setting.
Depending on its document size (selected paper source), 2-sided copy is not available.
If you want to copy a document in a copy ratio different from its default reduction ratio,
specify the <Copy Ratio> later.
This feature cannot be combined with <Erase Frame>.
<Copy Ratio> is fixed at 100%.
This feature cannot be combined with either 2-Sided Copy or <Erase Frame>.
Nothing special.
This feature cannot be combined with N on 1 (<4 on 1> / <2 on 1>, <ID Card Copy>).
The specified erase frame width increases/decreases according to the <Copy Ratio>
setting.
Nothing special.