9. Press
If the original is placed on the platen glass, follow the instructions that appear on the touch
panel display → press
[Done].
Scanning starts.
4
To cancel this setting, follow the procedure below.
To cancel all settings and return the machine to the Standard Scan mode, press [Initial Settings].To return
to the Inbox Selection screen, press
4-98
Specifying the Special Mail Box Features for Scanning
.
once for each original. When scanning is complete, press
For modes which have a right triangle (
Example: Frame Erase
Press [Special Features] → [Frame Erase] → [Cancel].
For modes which do not have a right triangle (
Example: Job Build
Press [Special Features] → [Job Build].
) on the bottom right of their key:
) on the bottom right of their key:
.