Canon iR3245 Manual page 532

Press [Select Original Size] → set the size of the original to scan.
If the original is two-sided, press [2-Sided Original] → select the type of
two-sided original → press [OK].
Press [Paper Select] → select the paper source to use for the main document
→ press [Done].
If you selected the paper to use for the main document from [Stack Bypass Settings], select
the paper size and press [Next] → select the paper type and press [OK] → press [Done]
If you want to add a cover, press [Add Cover].
Select the paper source to use for the cover and whether to print on the cover → press
[OK].
7
If you selected the paper to use for the cover from [Stack Bypass Settings], select the paper
type → press [Done].
The paper used for the cover page must be the same paper size as that which is used for copying the main
document.
If you select [Print] for only <Front Inside Cover> and/or <Back Inside Cover>, [Heavy] can be selected.
Only 64 to 90 g/m
cover page.
Select whether to saddle stitch the booklet.
If you select [Divided Booklet], enter the number of sheets that you want to
divide by pressing [-] or [+] → press [OK].
If the printing position of the image is out of place, and you want to set the
creep (displacement) correction, press [Creep Correct] → select [Auto] or
[Manual] → press [OK] → [OK].
If you select [Manual], press [
7-64 Making Copies for Use as a Booklet (Booklet)
2
paper can be used for the main document, and 64 to 128 g/m
] or [ ] to adjust the correction width.
2
paper can be used for the