Making Copies by Erasing the Book Frame (Book Frame Erase)
1. Press [Process/Layout] → [Frame Erase].
2. Press [Book Frame Erase] → select the facing-page original size →
press [Center] and [Sides] → set the frame width to erase by using [-] or
[+].
The frame area to be erased is uniformly set for all sides of the original. To set the value
independently for all sides of the original, press [Adjust Each Dim.].
If you select [Adjust Each Dim.], press [Top], [Left], [Center], [Right], and [Bottom] to set the
frame width to erase by using [-] or [+].
You can set the Book Frame Erase mode only for the original paper sizes shown on the touch panel
display.
3. Press [Done].
Making Copies by Erasing the Book Frame (Book Frame Erase)
7
7-91