1
3. Select the desired paper size.
The paper size/type currently loaded and the paper size/type reserved to be loaded are
displayed, as shown on the screen below.
If there is more than one reserved job waiting to print, only the last paper size/type specified for the
reserved copy job is shown on the Paper Select screen and Regular Copy Basic Features screen.
If you select [Free Size], [Envelope], [Tracing Paper], [Transparency], or [Labels], you cannot specify any
Finishing modes (Collate, Group, or Staple).
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions screen) is set to
'On', and the paper size/type have been stored, the selected paper size/type are displayed on the screen.
(See the Reference Guide.)
If you want to select a standard paper size:
●
If you want to select a nonstandard paper size:
●
If you want to select an envelope size:
●
If you want to select a standard paper size:
Select the desired paper size → press [Next].
To select an inch paper size, press [Inch-size].
1-42
Using the Stack Bypass