Composing Images (Form Composition) - Canon iR3245 Manual

Composing Images (Form Composition)

For instructions on this procedure using the Regular Copy Basic Features screen, see "Composing
Images(p.4-60)."
Remark
If you use the Form Composition mode with the
Cascade Copy mode, it is necessary to assign the
same name to the stored image form in both this
machine and the remote copy printer beforehand. If the
assigned image form name in this machine is not set in
the remote copy printer, the job is cancelled. If multiple
image forms with the same assigned name are stored
in the remote copy printer, different image may be
used for Form Composition.
To copy in the Form Composition mode, the Image
form must be stored in the memory of the machine.
(See the Reference Guide.)
The Form Composition mode can be used with other
copy modes to process images. However, copy modes
other than the Shift or Mirror Image mode are effective
on the copied images, and not on the stored image
forms.
1. Press [Process/Layout] → [Form Composition].
Up to 100 image forms can be stored. However, this
number varies depending on the capacity of the hard
disk.
Printing performance may not be optimal in the Form
Composition mode, depending on the scanned original
and image form.
Composing Images (Form Composition)
7
7-83