2. Select the desired margin type.
3. Select [Front Side] or [Back Side] → press [-] or [+] to set the margin
width → press [OK].
If you are using the Margin and 2-Sided modes together and copying or printing a document that already
has a margin, follow the instructions below:
1
2-Sided:
2
2-Sided:
2
1-Sided:
If you are using the Margin and 2-Sided modes together and copying or printing a document that does not
have a margin, follow the instructions below:
1
2-Sided:
2
2-Sided:
2
1-Sided:
If you enter a value other than 0, you can switch between positive and negative margin width by pressing
[ ± ].
Example:
To enter values in inches, press [Inch].
Set the Margin mode for the back only.
You do not need to set the Margin mode. Proceed
to make copies or prints in the usual way.
Set the Margin mode for the back only.
Set the Margin mode for both the front and back.
Set the Margin mode for both the front and back.
Set the Margin mode for both the front and back.
(+)10 → [ ± ] → -10
-50 → [ ± ] → (+)50
Margin Mode
4-31
4