Canon iR3245 Manual page 56

1
Press [OK].
4. Press [Done].
This completes the settings for a reserved copy job using the stack bypass. The subsequent
steps show you how to load paper into the stack bypass and complete the scanning and
printing process of the reserved job.
5. Press
6. When it is time for the reserved copy job to be printed, load the specified
paper into the stack bypass.
The specified paper size/type is displayed on the screen when it is time for the reserved copy job to be
printed.
Make sure to load the same paper size and type selected in step 3 into the stack bypass. Printing does not
start if paper of a different size or type is loaded.
7. Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides → specify the paper
1-44 Using the Stack Bypass
.