Making Copies By Erasing The Frame Around The Original (Original Frame Erase) - Canon iR3245 Manual

Making Copies by Erasing the Frame around the Original (Original
Frame Erase)
1. Press [Process/Layout] → [Frame Erase].
7
2. Press [Original Frame Erase] → select the original size → set the frame
width area to erase by pressing [-] or [+].
The frame area is erased evenly (based on the value you set) around each edge of the
original. To set different frame erase width values for the top, right, left, and bottom sides of
the original independently, press [Adjust Each Dim.].
If you press [Adjust Each Dim.], select the frame erase values by pressing [-] or [+].
You can set the Original Frame Erase mode only for the original paper sizes shown on the touch panel
display.
3. Press [Done].
7-90

Making Copies by Erasing the Frame around the Original (Original Frame Erase)