Canon iR3245 Manual page 381

2. Press [Settings] under <Front Side> or <Back Side>.
Back side settings are only valid when making two-sided prints.
3. Use - (numeric keys) to enter the shift position.
Select the shift direction.
Enter the shift value.
Press [OK].
To change a value you entered, select the shift direction → enter the correct valueusing
(numeric keys).
The values for the back side can also be automatically set by selecting [Same as Front Side] or [Opposite
to Front Side].
Example: When the front side is set to 50 mm for the left,
and 100 mm for the top.
If you press [Same as Front Side]:
50 mm for the left, and 100 mm for the top
If you press [Opposite to Front Side]:
50 mm for the right, and 100 mm for the top
Example: To move the original image in a diagonal direction:
●
-
Using the Numeric Keys 4-127
4