If [Create] is selected:
Press [Enter] → enter the text → press [OK].
You can also select the text which has been registered in Register Characters for Page No./
Watermark in Common Settings from the Additional Functions screen.
4
5. Specify the text size and print type → press [OK].
Select the size of the watermark from [Small], [Medium], and [Large] ('36.0 pt.', '54.0 pt.', and
'72.0 pt.').
You can select [Transparent] or [Overlay] for the print type. If [Transparent] is selected, you
can also adjust the halftone density by pressing [Light] or [Dark].
Watermark Printing 4-171