Cover/Sheet Insertion - Canon iR3245 Manual

Cover/Sheet Insertion

This mode enables you to set the machine to automatically add front and back covers, sheet
insertions, or chapter pages using a different type of paper from that used for the main document. In
addition, you can decide whether the front and back covers, and the sheet insertions are printed on
as well. Chapter pages are always printed on.
4
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-8)."
You cannot set the Cover/Sheet Insertion mode when
you select multiple documents. In this case, set the
Cover/Job Separator mode.
If you select the Staple mode when an optional finisher
is attached, you cannot staple more than 30 sheets of
A3 or A4R paper, or 50 sheets of A4 paper, including
sheet insertions.
Front Cover/Back Cover
This setting adds a front cover and back cover sheet to each set of prints. You may also print on the
front/back cover sheet.
4-106 Cover/Sheet Insertion
If you are printing on the front cover, back cover, or
sheet insertions, these sheets are included in the
count of the total number of prints made. If these
sheets are left blank, however, the machine's counter
does not count them as prints.
If you are adding chapter pages, these sheets are
included in the count of the total number of prints
made.