Canon iR3245 Manual page 35

Numbering mode.
The Cascade Copy mode is used in combination with all three of the Different Size Originals, Auto
Paper Selection, and 2-sided modes.
The printer which is operating normally has completed the cascade copy job.
An error occurs in the printer which is operating normally.
The cascade copy job has almost finished.
The number of copies is fewer than six.
When using the Copy Set Numbering mode.
If Error Recovery for the Cascade Copy mode is set to 'On', a machine in which an error occurs cannot
resume the remaining copy job even after the error has been resolved, if the copy job has already been
reassigned.
You cannot select two different machines other than this machine for the Cascade Copy mode. You must
include this machine as one of the output devices.
3. From the Copy Basic Features screen, set the desired copy modes.
In the Remote Copy mode, only those copy settings supported by the selected remote copy printer are
available.
In the Cascade Copy mode, you cannot select copy settings that are not supported by the selected remote
copy printer. Also, if you select a remote copy printer equipped with a different finisher, you cannot select
settings other than the Collate and Group modes, even if the remote copy printer supports the specified
copy mode.
4. Press .
Giving Priority to the Output Device
1
1-23