Enlarging/Reducing Originals With Copy Ratios Set Independently For The X And Y Axes (Xy Zoom) - Canon iR3245 Manual

Enlarging/Reducing Originals with Copy Ratios Set
Independently for the X and Y Axes (XY Zoom)
For instructions on this procedure using the Regular Copy Basic Features screen, see "Setting the X
and Y Axes Independently(p.3-24)."
Remark
You cannot enlarge/reduce highly transparent
originals, such as transparencies, in the Auto XY Zoom
mode. To make such copies, specify the copy ratio.
If you set the Auto XY Zoom mode, select the paper
size using the Manual Paper Selection mode. If you do
not select a paper size, Paper Drawer 1 is
automatically selected and the copy ratio is set to
match the size of the paper loaded in that drawer.
1. Press [Other Ratio Settings] → [XY Zoom].
2. Press [X] (horizontal axis) or [Y] (vertical axis) → enter a value.
Press [Auto XY Zoom] to set the copy ratios automatically.
Enlarging/Reducing Originals with Copy Ratios Set Independently for the X and Y Axes (XY
If you set the copy ratio in the Auto XY Zoom mode,
Auto Orientation is not performed.
7
7-19
Zoom)