Cover/Sheet Insertion - Canon iR3245 Manual

Cover/Sheet Insertion

This mode enables you to set the machine to automatically add front and back covers, sheet
insertions, or chapter pages using a different type of paper from that used for the main document. In
addition, you can decide whether the front and back covers, and the sheet insertions are copied or
printed on as well. Chapter pages are always copied or printed on.
4
Remark
For information on the modes which cannot be set in
combination with this mode, see "Combination of
Functions Chart(p.9-2)."
If you select the Staple mode when an optional finisher
is attached, you cannot staple more than 30 sheets of
A3, or A4R paper, or 50 sheets of A4 paper, including
sheet insertions.
Front Cover/Back Cover
This setting adds a front cover and back cover sheet to each set of copies. You may also copy on the
front/back cover sheet.
Sheet Insertion/Chapter Page
This setting inserts a sheet of paper between copies. The Sheet Insertion mode is useful when you
want to use a blank sheet to help sort out the copies. You may also copy on the sheet insertions.
Since the chapter page is always copied on one side, the Chapter Page mode is useful when you
want to organize the copies by chapter.
4-8 Cover/Sheet Insertion
If you are copying on the front cover, back cover, or
sheet insertions, these sheets are included in the
count of the total number of copies made. If these
sheets are left blank, however, the machine's counter
does not count them as copies.
If you are adding chapter pages, these sheets are
included in the count of the total number of copies
made.