Storing Copy Settings - Canon iR3245 Manual

Storing Copy Settings

Remark
You cannot store the Job Block Combination mode in
Mode Memory.
1. Specify the copy settings on the Copy Basic Features screen and/or
Special Features screen.
2. Press [Special Features] → [Mode Memory].
3. Select a key ([M1] to [M9]) for storing the settings → press [Register].
Keys that already have settings stored in them are displayed with a coloured triangle (
right corner of the key.
If you select a key that already has settings stored in it, the settings are displayed.
If you select a key without settings:
●
If you select a key that already has settings stored in it:
●
) in the lower
Storing Copy Settings
5
5-5