3.
For GT15, GT14 or GT11
2.
1 - 34
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
4.
1.
3.
The [Communication setting] appears.
4.
Verify that the communication driver name to
be used is displayed in the communication
interface box to be used.
5.
When the communication driver name is not
displayed normally, carry out the following
procedure again.
1.1Setting the Communication Interface
1.
After powering up the GOT, touch [Main Menu]
[Communication setting] from the Utility.
2.
Touch [Communication setting].
(The screen on the left is not displayed on
GT11.)