Mitsubishi Electric GOT1000 Series Connection Manual page 381

Graphic operation terminal
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

12.4 Device Range that Can Be Set
The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.
(1) Setting item
TOSHIBA PROSEC T/V Series
TOSHIBA Unified Controller nv Series
Item
Set the device name, device number, and bit number.
Device
The bit number can be set only when specifying the
bit of word device.
Displays the device type and setting range which are
Information
selected in [Device].
Set the station number of the controller to be
monitored.
Select this item for monitoring the host
Host
controller.
Network
Select this for monitoring other controllers.
After selecting the item, set the station
Other
number of the controller to be monitored.
NW No.: Set the network No.
Station No.: Set the station No.
Description
POINT
POINT
POINT
(1) Device settings of TOSHIBA PLC
(a) When setting a relay as a bit device
Set the device using the format of word
address (DEC) + bit address (HEX).
Device name
(b) When setting a relay as a word device
Set the device using the format of word
address (DEC).
For the device name setting, enter "w" before
the bit device name.
Device name
(adding "W")
(2) Notation of device address (when using PROSEC
V series)
The notation of device address setting is different
between the TOSHIBA PLC peripheral software
and GOT.
For the difference of notations between peripheral
softwares and GOT, refer to the following.
 TOSHIBA PLC (TOSHIBA PROSEC T/V
Series)
12. CONNECTION TO TOSHIBA PLC
12.4 Device Range that Can Be Set
9
10
Device number
Bit address (HEX)
11
Word address (DEC)
12
Device number
13
14
15
12 - 13

Advertisement

Table of Contents
loading

Table of Contents