Mitsubishi Electric GOT1000 Series Connection Manual page 225


Precautions when preparing a cable
(1) Cable length
The length of the RS-485 cable must be 500m or less.
(2) GOT side connector
For the GOT side connector, refer to the following.
1.4.1 GOT connector specifications
(3) OMRON temperature controller side connector
Use the connector compatible with the OMRON
temperature controller.
For details, refer to the user's manual of the OMRON
temperature controller.

Setting terminating resistors
(1) GOT side
Set the terminating resistor setting switch of the GOT
main unit to "100 OHM".
For details of terminating resistor settings, refer to the
following.
1.4.3 Terminating resistors of GOT
(2) OMRON temperature controller side
When connecting a OMRON temperature controller to
the GOT, the terminating resistor must be connected to
the OMRON temperature controller.
User's Manual of the OMRON temperature
controller
5. CONNECTION TO OMRON TEMPERATURE CONTROLLER
5.3 Connection Diagram
1
2
3
4
5
6
7
8
5 - 11