Mitsubishi Electric GOT1000 Series Connection Manual page 161

POINT POINT POINT
Format setting
The compatible format of control equipment differs
depending on model.
Model name
SDC20/21, SDC30/31, SDC40A/40B/40G, CMS,
CMF, CML, MQV, MPC, MVF, PBC201-VN2, RX
DMC10, SDC15, SDC25/26, SDC35/36,
SDC45/46, AUR350C, AUR450C, CMC10B
DMC50, AHC2001
For the continuous access and random access of the
control equipment, refer to the following manual.
User's Manual of the AZBIL control equipment
POINT POINT POINT
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
Compatible
format
Format 1 only
Format 1 or
Format 2
The format
setting is invalid.
3. CONNECTION TO AZBIL CONTROL EQUIPMENT
3.4 GOT Side Settings
1
2
3
4
5
6
7
8
3 - 47