Save To Rv Card; Redundancy Settings; Presets; Input Backup - NovaStar MCTRL660 PRO User Manual

Gamma
Contrast
Saturation
Hue

6.7.5 Save to RV Card

By using this function, you can:

Send and save the configuration information to the receiving cards, including brightness, color temperature,
gamma and display settings.

Overwrite the information saved to the receiving card earlier.

Ensure that the data saved in the receiving cards will not be lost upon power failure of receiving cards.

6.7.6 Redundancy Settings

Set the controller as the primary or backup device. When the controller works as a backup device, set the data
flow direction as opposite to that of the primary device.
Note
If the controller is set as the backup device, when the primary device fails, the backup device will immediately
take over the work of the primary device, that is, the backup takes effect. After the backup takes effect, the
target Ethernet port icons on the home screen will have marks on top flashing once every 1 second.

6.7.7 Presets

Choose Advanced Settings > Presettings to save current settings as a preset. Up to 10 presets can be
saved.

Save: Save current parameters as a preset.

Load: Read back the parameters from a saved preset.

Delete: Delete the parameters saved in a preset.

6.7.8 Input Backup

Set a backup video source for each primary video source. Other input video sources supported by the controller
can be set as backup video sources.
After a backup video source takes effect, the video source selection is irreversible.
Primary Input
SDI
DVI
HDMI
www.novastar.tech
MCTRL660 PRO Independent Controller User Manual
Range: 1.0 to 4.0; step: 0.1
Range: 0% to 100%; step: 1%
Range: 0% to 100%; step: 1%
Range: –180 to +180; step: 1
Backup Input
NULL/DVI/HDMI
NULL/SDI/HDMI
NULL/DVI/SDI
21