Advanced Configuration; Save To Rv Card; More Settings - NovaStar NovaPro UHD User Manual

Step 2
Rotate the knob to choose Screen Settings > Quick Configuration, and press the knob to enter the quick
configuration screen.
Figure 4-3 Quick configuration
Step 3
Set Cabinet Row Qty and Cabinet Column Qty according to the actual row and column quantities of the
cabinets.
Step 4
Rotate the knob to Port 1 Cabinet Qty to set the quantity of the cabinets loaded by Ethernet port 1.
Step 5
Rotate the knob to Data Flow and press it, then select an appropriate one.
Data flow is the physical cabinet connection pattern when viewed in front of the screen.
During data flow settings, you can view the real-time effects of different data flow settings on LED display by
rotating the knob. When you are satisfied with the LED display image, press the knob to apply the settings.

4.3.2 Advanced Configuration

You can set the cabinet row and column quantities, horizontal offset, vertical offset and data flow of the
cabinets loaded by a single Ethernet port.
Step 1
Press the knob to enter the main menu screen.
Step 2
Rotate the knob to choose Screen Settings > Advanced Configuration, and press the knob to enter the
advanced configuration screen.
Step 3
Turn on the advanced configuration function, and then set the cabinet row and column quantities, horizontal
offset, vertical offset and data flow for the target Ethernet port.
Figure 4-4 Advanced configuration

4.3.3 Save to RV Card

You can send and save the screen configuration to the receiving card. The configuration data will not be lost
after the device is powered off.

4.3.4 More Settings

Mapping
Mapping is used to show the relations between the cabinets of LED screen and the sending devices. You can
view or check the connections of the cabinets.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
4