4)
Save the configuration file of cabinet into receiving card. See detailed operation in
Parameters.
7.4.5 Save RV Card Parameters
Save the current configuration parameters to the hardware so that the data will not disappear when there
is outage.
7.4.6 Smart Brightness
This parameter is set to Disable by default. To successfully enable this function, you must load the
configuration files first. Currently, only non-pulse-width modulation (PWM) chips are supported.
7.4.7 Restoring to Factory Settings
Restore to the factory Settings for the MCTRL660.
www.novastar.tech
Controller MCTRL660 User's Manual
7.4.5 Save RV Card
21