Basic Data Power Section Hcs03 - Bosch Rexroth IndraDrive HMV Project Planning Manual

80/369 Bosch Rexroth AG | Electric Drives
Power Sections for Converters - IndraDrive C

Basic Data Power Section HCS03

Description
rated control voltage input (UL)
control voltage when using motor
holding brake with motor cable
length < 50 m 2)
and Controls
I output current
out
P power dissipation
Diss
f switching frequency
s
Fig.5-65: Power dissipation vs. output current
General Information
This chapter contains:
● data for control voltage supply
● data for mains voltage supply
● data of DC bus
● data of built-in braking resistor and requirements on an external braking
resistor
● data of inverter
● data for cooling and power dissipation
The order of the data tables below follows the energy flow in the
drive controller – from mains connection to motor output.
Control Voltage
Data for control voltage supply
HCS03.1E-
Symbol Unit
W0070-_-05
U
V
1)
N3
U
V
N3
Rexroth IndraDrive | Project Planning Manual
HCS03.1E- HCS03.1E-
W0100-_-05 W0150-_-05
24 ± 20 %
24 ± 5 %
HCS03.1E-
W0210-_-05