Bosch Rexroth IndraDrive HMV Project Planning Manual page 28

18/369 Bosch Rexroth AG | Electric Drives
General Specifications of the Devices
CCC (China Compulsory Certifica‐
and Controls
Description
listing according to UL standard (UL)
listing according to CSA standard
Fig.4-4: Applied standards
UL ratings
For using the devices in the scope of UL, take the UL ratings of the
individual devices into account. You can find the UL ratings in the
corresponding documentation in the section "Technical Data - UL
Data".
In the scope of UL, it is exclusively the supply units HMV01.1R,
HMV01.1E, HMV02.1R, HCS02.1E and HCS03.1E which have
been approved for supplying IndraDrive devices.
Wiring material
For wiring the devices, in the scope of UL exclusively use copper
wires of class 1 (or equivalent) with a minimum allowed conductor
temperature of 75 °C.
Allowed pollution degree
Take the allowed pollution degree of the devices into account. Only
use the devices in ambiances with the maximum pollution degree
2 (see Ambient and Operating Conditions).
The devices have been listed by "Underwriters Laboratories
Inc.®" (UL). For evidence of certification, see on the Internet under
http://www.ul.com
or the "Company name: Rexroth". You can find the file number of
the device in this documentation in the section "Technical Data -
Information on Standards" (this example applies to HCS02).
The control sections are part of the listed devices.
The CCC mark of conformity comprises a compulsory certification of safety and
tion)
quality for certain products which are mentioned in the product catalog "First
Catalogue of Products Subject to Compulsory Certification" and the CNCA
document "Application Scope for Compulsory Certification of Products acc. first
Catalogue" and which are put into circulation in China. The compulsory certifi‐
cation has been existing since 2003.
CNCA is the responsible Chinese authority for certification directives. When a
product is imported in China, the certification will be checked at the customs by
means of the entries in a database. For compulsory certification, three criteria
are normally relevant:
1. Customs tariff number (HS code) according to CNCA document "Appli‐
cation Scope for Compulsory Certification of Products acc. first Cata‐
logue".
2. Scope of application according to CNCA document "Application Scope for
Compulsory Certification of Products acc. first Catalogue".
3. For the IEC product standard used, there must be a corresponding Chi‐
nese GB standard.
Rexroth IndraDrive | Project Planning Manual
Standard
UL 508 C
see data sheet of the respective device in
the section "Information on Standards"
under "Certifications" by entering the file number