Basic Data Supply Unit Hmv01, Infeeding - Bosch Rexroth IndraDrive HMV Project Planning Manual

190/369 Bosch Rexroth AG | Electric Drives
IndraDrive M Supply Units
Description
minimum distance on the bottom of
the device 3)
temperature rise with minimum dis‐
tances d ; d ; P
bot top BD
CAUTION

Basic Data Supply Unit HMV01, Infeeding

and Controls
Symbol Unit HMV01.1E-W0030
d
mm
bot
ΔT K
1) HMV, HCS: plus dissipation of braking resistor, control section; KSM:
plus rated power consumption control voltage input
2) 3) see fig. "Air intake and air outlet at drive controller"
Fig.7-12: HMV - Data for cooling and power dissipation
Distances
Property damage due to temperatures higher than 105 °C!
Comply with indicated minimum distances!
A air intake
B air outlet
C mounting surface in control cabinet
d distance top
top
d distance bottom
bot
Fig.7-13: Air intake and air outlet at drive controller
General Information
This chapter contains:
● data for control voltage supply
● data for mains voltage supply
Rexroth IndraDrive | Project Planning Manual
HMV01.1E-W0075 HMV01.1E-W0120
130
65