Bosch Rexroth IndraDrive HMV Project Planning Manual page 167

Project Planning Manual | Rexroth IndraDrive
Selecting Standard Motors
Operation With Standard Motors
General Information
The tables below show the nominal powers P
be operated at the respective drive controller. The data are subject to the fol‐
lowing conditions:
● motor design:
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 400 V, 50 Hz
at mains voltage U
LN
4-pole standard motor (2 pole pairs) with rated voltage 3 AC 460 V, 60 Hz
at mains voltage U
LN
● assigned mains choke is used
● operation at minimum switching frequency f
● rotary field at output with f
● ambient temperature T
● overload ratio K = P
"UEL_P_e"
● type of mains connection: individual supply
When choosing standard motors for HMS/HMD, select an appro‐
priate HMV supply unit. Observe the performance data P
P in the performance profile "UEL_P_e" of the supply unit.
DC_base
Operation With Standard Motors
Operating Standard Motors at 3 AC 400 V
in preparation
Operating Standard Motors at 3 AC 460 V
in preparation
Electric Drives | Bosch Rexroth AG
and Controls
Power Sections for Inverters - IndraDrive M
of standard motors which can
nenn
≥ 3 AC 400 V or
≥ 3 AC 460 V
= f
s
>f
out out_still
≤T
a a_work
/ P according to performance profile
DC_peak DC_base
157/369
(min.)
s
and
DC_peak