Basic Data Power Section Hmd01 - Bosch Rexroth IndraDrive HMV Project Planning Manual

Project Planning Manual | Rexroth IndraDrive

Basic Data Power Section HMD01

Description
rated control voltage input (UL)
control voltage when using motor
holding brake with motor cable
length < 50 m 2)
control voltage when using motor
holding brake with motor cable
length > 50 m 3)
In addition, take the power at the braking resistor and the power
consumption of the control section into account. Both powers are
not contained in the figure.
I output current
out
P power dissipation
Diss
f switching frequency
s
Fig.6-84: Power dissipation vs. output current
General Information
This chapter contains:
● data for control voltage supply
● data of DC bus
● data of inverter
The order of the data tables below follows the energy flow in the
drive controller – from mains connection to motor output.
Control Voltage
Data for control voltage supply
Symbol Unit HMD01.1N-W0012
U
V
1)
N3
U
V
N3
U
V
N3
Electric Drives | Bosch Rexroth AG
and Controls
Power Sections for Inverters - IndraDrive M
HMD01.1N-W0020
24 ± 20 %
24 ± 5 %
26 ± 5 %
171/369
HMD01.1N-W0036