Bosch Rexroth IndraDrive HMV Project Planning Manual page 89

Project Planning Manual | Rexroth IndraDrive
Power Dissipation vs. Output Cur‐
A air intake
B air outlet
C mounting surface in control cabinet
d distance top
top
d distance bottom
bot
Fig.5-64: Air intake and air outlet at drive controller
The figure below illustrates the connection between power dissipation and out‐
rent
put current, depending on the switching frequency f
controller. See also Parameter Description "P-0-0001, Switching frequency of
the power output stage".
In addition, take the power at the braking resistor and the power
consumption of the control section into account. Both powers are
not contained in the figure.
Electric Drives | Bosch Rexroth AG
and Controls
Power Sections for Converters - IndraDrive C
which was set at the drive
s
79/369