Usage; Assignment - Bosch Rexroth IndraDrive HMV Project Planning Manual

Project Planning Manual | Rexroth IndraDrive
11.2.3

Usage

11.2.4

Assignment

The HAS01 accessories are used to
● fix the drive controllers to a mounting surface
● connect the DC bus connections of drive controllers
● connect the 24V supply of drive controllers of the Rexroth IndraDrive M
range
● connect the equipment grounding conductor from drive controller to drive
controller or supply unit
● increase the current carrying capacity of the contact bars in the DC bus
for high-performance devices (by means of the parts "end piece" and
"bar" in HAS01; see chapter "Assignment")
Use of the parts "end piece" and "bar"
For high-performance devices, you have to mount the end pieces
and bars contained in the HAS01 accessory (see chapter "Assign‐
ment").
See sections "Terminal Block L+, L- (DC Bus Connection)" and "Terminal Block,
24V - 0V (24V Supply)" in the Project Planning Manual "Rexroth IndraDrive,
Supply Units and Power Sections".
The accessories are assigned to the individual devices depending on the device
width (see section "Type Code" ).
Device type
HMS01.1N- W0020
W0036
W0054
W0070
W0110
W0150
W0210
W0350
HMD01.1N- W0012
W0020
W0036
HMS02.1N- W0028
W0054
HLB01.1 D
HLC01.1 D
Electric Drives | Bosch Rexroth AG
and Controls
Width / mm Accessory HAS01.1-
50 050
50 050
75 075
100 100
125 125
150 150
200 200
350 350
50 050
50 050
75 075
49.5 050
74.5 075
100 100
100 100
305/369
Accessories
with "end
piece"
-
-
-
-
-
-
■
■
-
-
-
-
-
-
-