352/369
Bosch Rexroth AG | Electric Drives
Accessories
HAS02.1-004 at HCS03.1E-W0070
Mounting
and Controls
1
fixing device
2
shielding plate
3
clip
4
different possibilities of mounting the shielding plate, according to motor
cable routing
Fig.11-47:
HAS02.1-004 at bottom of drive controller HCS03.1E-W0070
1.
By means of supplied screws, fasten fixing device to bottom of drive con‐
troller.
2.
Fix shielding plate to fixing device according to desired motor cable rout‐
ing.
3.
Fix shield of cable to shielding plate with appropriate clip.
Rexroth IndraDrive | Project Planning Manual