Bosch Rexroth IndraDrive HMV Project Planning Manual page 252

242/369 Bosch Rexroth AG | Electric Drives
Functions and Electrical Connection Points
Functions
for supply with mains voltage, infeeding
and regenerative
for supply with mains voltage, infeeding
input mains voltage synchronization
plug with screw flange
screw connection
Mains contactor and mains control
integrated mains contactor
external mains contactor
contact for controlling the external mains
contactor
input for N/O contact (EIN)
input for N/C contact (AUS)
integrated feedback contacts
inputs for feedback contacts
DC bus functions
connection for DC bus
and Controls
Device
HMV01.1R
HMV02.1R
HMV01.1E
HCS02.1E
HCS03.1E
HMV01.1R
HMV02.1R
HCS02.1E-
W0012...0070
HCS03.1E-
W0070
HCS03.1E-
W0100...0210
2)
HMV01
HMV02.1R
HCS02
HCS03
HMV01.1R-
W0120
HMV01.1R-
W0120
3)
HMV01
4)
HMV01
HMV with inte‐
grated mains
contactor
HMV without in‐
tegrated mains
contactor
HMV
HMS
HMD
5)
HCS
2)
3)
4)
Rexroth IndraDrive | Project Planning Manual
Connec‐ Description /
tion point
properties
X3
X3
X14 used for synchronizing regeneration stage with
supply mains at X3
X3
X3
-
-
X34
X32 connection for ON switch of mains connection
X32 connection for OFF switch of mains connection
X33 1 N/O contact and 1 N/C contact
X40 for 1 N/O contact and 1 N/C contact
terminal Provides the option to "loop through" the supply
block via contact bars.
L+; L-
not available for HMV01.1R-W0120
not available for HMV01.1R-W0120
not available for HMV01.1R-W0120