Basic Data Power Section Hcs02 - Bosch Rexroth IndraDrive HMV Project Planning Manual

42/369 Bosch Rexroth AG | Electric Drives
Power Sections for Converters - IndraDrive C

Basic Data Power Section HCS02

Description
rated control voltage input (UL)
control voltage when using motor
holding brake with motor cable
length < 50 m 2)
and Controls
I output current
out
P power dissipation
Diss
f switching frequency
s
Fig.5-22: Power dissipation vs. output current
General Information
This section contains
● data for control voltage supply
● data for mains voltage supply
● data of DC bus
● data of built-in braking resistor and requirements on an external braking
resistor
● data of inverter
● data for cooling and power dissipation
The order of the data tables below follows the energy flow in the
drive controller – from mains connection to motor output.
Control Voltage
Data for control voltage supply
HCS02.1E-
Symbol Unit
W0012-_-03
U
V
1)
N3
U
V
N3
Rexroth IndraDrive | Project Planning Manual
HCS02.1E- HCS02.1E-
W0028-_-03 W0054-_-03
24 ± 20 %
24 ± 5 %
HCS02.1E-
W0070-_-03