Bosch Rexroth IndraDrive HMV Project Planning Manual page 35

Project Planning Manual | Rexroth IndraDrive
Control Voltage Block Diagram The control voltage, which is supplied via the connection for 24V supply, takes
effect according to the following block diagram.
BR circuit for brake control
LT power section, e.g. HCS02
ST control section, e.g CSB01
ZK DC bus
int. SMPS internal switching power supply unit, for types HCS0x.1E-Wxxxx-NxxV
Fig.4-13: Block diagram of internal control voltage
Electric Drives | Bosch Rexroth AG
and Controls
General Specifications of the Devices
25/369