Table of Contents
Advertisement
WAGO-I/O-SYSTEM 750
753-466 2 AI 4-20 mA S.E.
Pos : 63.14 /Serie 753 ( WAGO-I/O-SYST EM)/Monti eren/Kodier ung der Stec ker Seri e 753 @ 4\mod_1240393983875_21.doc x @ 31217 @ 3 @ 1
5.3.1
Coding
Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1.
Insert the pin into the socket.
Figure 13: Assembling the Coding Fingers
2.
Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).
Figure 14: Inserting the Coding Fingers
3.
Place the plug onto the I/O module.
Figure 15: Plugging the Plug into Place
Manual
Version 1.5.0
Mounting
33
Advertisement
Chapters
Table of Contents
