Coding; Figure 13: Attachment Of Cable Binders; Figure 14: Assembling The Coding Fingers; Figure 15: Inserting The Coding Fingers - WAGO 753-1630 Manual

52 Mounting

Figure 13: Attachment of Cable Binders

Pos: 90.13 /Serie 753 (WAGO-I/O-SYSTEM)/Montieren/Kodierung der Stecker Serie 753 @ 4\mod_1240393983875_21.docx @ 31217 @ 3 @ 1
6.3.1

Coding

Coding using small plastic pins and sockets facilitates mating of the I/O module
with the appropriate plug.
1. Insert the pin into the socket.

Figure 14: Assembling the Coding Fingers

2. Position the assembled coding fingers in the I/O module. Due to its design,
each coding finger allows 4 different coding options (i.e.; 16 different
options using 2 coding fingers).

Figure 15: Inserting the Coding Fingers

Manual
Version 1.2.0 FW/HW Version 02/01
753-1630 SMI Master Module 230 V AC